Parts list for fitting 25l Acerbis tank to Suzuki DR650SE

All measurements in millimetres

4 x Steel sleeves, 10 long x 10Ø outside x 7Ø inside
2 x alu or steel sleeves, 14 long x 9Ø inside, diagonally cut (for tilting radiator)

2 x bolts M6x30 |
4 x washers 6Ø  | for front guard

2 x sleeve nuts M6, flat allen head or similar, shaft (sleeve) 16 long
(note: if you can't get these you should make the bolts welded onto the rear bracket 5mm longer, so you can use ordinary nuts and washers)

2 x bolts M6, flat head, countersunk, pref. allen head

1 x bolt M8x35             |
1 x bolt M8x120, 8.8 grade | for oil cooler

1 x bolt M8x60, 8.8 grade |
1 x bolt M8x65, 8.8 grade | for engine mount

3 x lock nuts M8
7 x washers M8

Thread lock (like Loctite blue)

Materials for front and rear brackets, according to pictures